Resetting the TinyScreen
This is only if your O Watch was working fine and were successfully able to upload programs but you are now unable to upload the program for the following reasons:
- When you press upload it is stuck on the ‘Uploading” status and doesn’t move forward.
- The TinyScreen board has disappeared from your ports and you have tried unplugging and replugging the USB cables at both ends firms.
If you are a Windows 7/8 user, please check your USB devices from the system tray and Windows Device Manager to verify if the driver is still correctly mapped. If not, Re-Install the USB Driver.
Resetting the TinyScreen
To reset the TinyScreen, power off the TinyScreen using the slide switch. Use a pencil or some other similar object to slide the switch down to the OFF position.
Then press and hold the button closest to the usb connector while sliding the switch to the ON position. Then try uploading your program and it should work. Repeat this step if it doesn’t. If it still doesn’t resolve the problem please contact us for support.